So the 2020 ADS-B out requirement is getting closer and the cost of many systems is just painful on the wallet. So I figure why not role my own, because how hard can it be ;D.
Going with a two part setup featuring a remote head for pilot input while the rest of radio can be installed where ever in the plane. The design includes an altitude encoder, waas gps, 978 Mhz UAT receiver, 1030/1090 transceiver @250 watts peak. Serial connection support CAN Bus and GDL-90(RS232) format.
I should have my first set of boards back from OSHpark in the next two weeks. Working on finishing up the layout for the Main digital board, hopefully finish that by the weekend.
Going with a two part setup featuring a remote head for pilot input while the rest of radio can be installed where ever in the plane. The design includes an altitude encoder, waas gps, 978 Mhz UAT receiver, 1030/1090 transceiver @250 watts peak. Serial connection support CAN Bus and GDL-90(RS232) format.
I should have my first set of boards back from OSHpark in the next two weeks. Working on finishing up the layout for the Main digital board, hopefully finish that by the weekend.