• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Monnett electro-x mount bushings?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Flyguyeddy

Well-Known Member
Joined
Jun 9, 2018
Messages
440
Are the rubber bushings lycoming or continental parts? Seems like the diehl cases use lycoming. If so, does this meani could just buy the poly bushings from revmaster?
 
Brandon: The tube spacers used in the Lycoming bushings are 1-1/2” long. You can make them out of 1/2” OD x .035” wall 4130 tubing, or 3/8” ID mild steel bushing stock. I used the large diameter thick Lycoming bushing as well. The AN6 bolts are torqued to 175 in-lb (14.58 ft-lb).
 
Back
Top