Flyguyeddy
Well-Known Member
- Joined
- Jun 9, 2018
- Messages
- 440
I have two electrox setups, one of which is missing the magnet ring for whatever reason.
I have obtained a newer kohler stator and it fits the mounting pattern of the old onan/wisconsin stator. The wires come out of the wrong side of the stator but that should be easy to remedy. With the use of this stator i should be able to run a normal type combination regulator/rectifier. The magnets are available from a pulling tractor vendor and must be spaced with 1/4†aluminum pins. Im not sure of exactly what type of glue to install the magnets with.
https://imgur.com/gallery/5t1OLCt
I have obtained a newer kohler stator and it fits the mounting pattern of the old onan/wisconsin stator. The wires come out of the wrong side of the stator but that should be easy to remedy. With the use of this stator i should be able to run a normal type combination regulator/rectifier. The magnets are available from a pulling tractor vendor and must be spaced with 1/4†aluminum pins. Im not sure of exactly what type of glue to install the magnets with.
https://imgur.com/gallery/5t1OLCt